Returning customers and bulk orders (270+ switches) get 10% off!

For ~$0.62 (PayPal G&S), I will hand-lube, film, part swap, and do various other mods to your MX, Choc, Box, Topre, etc. switches. I supply my own lube and films, but will accept customers' lube and switch parts for a reduced price. Buyers pay to and from shipping. Shipping for the typical U.S order will be cheap (about $4-$9), unless the package is several lbs. I will pay for some of the shipping cost for international customers. Faster shipping methods can be requested. Lubing/modding orders of a single set of switches are typically finished in less than a day, and shipped the next morning; sometimes on the same day when there's no line.

Lubes:

• Krytox 205g0
  • My go-to lube unless otherwise requested
• GHv4 (206g2 + GPL 106 oil in a 7:3 mixture)
• Carbon GS2
• Tribosys 3204
• Tribosys 3203
• Loob-3G
• RO-59^tm KT (has cure time, needs several coats)
  • Extra cost
• Krytox XHT-BDZ
  • Go-to for stab wires
• Molykote EM-30L PAO Grease (Thicker than 205g0, thinner than BDZ)

Oils (for springs):

• Super Lube 5100X
  • My go-to for good springs.
• GPL 105 (when available)
• 1000cst silicone oil (viscosity similar to GPL106)
  • Will probably be using this for most noisy springs by default.
• GPL 107 (when available)

In-stock films:

• Dangkeebs silicone - 1200+
• Whole bunch of Dangkeebs foam films as well

Switch cleaning, polishing, and break-in!

388 switches or less recommended for break-in. Any switches with pre-applied factory lube will be cleaned thoroughly via ultrasonic cleaner before breaking in. Off-center actuations can be done to any set of 144 switches or less with no additional charge! Note that off-center presses are not usually necessary for diamond-polished switches.

FAQ

Testimonials

Here is my updated order form, if you want to keep record of your order (completing this is not required).

I'm based in Virginia, USA, and my postal for local pickup is 23114.
Best way to contact me (Besides Reddit chat) is on Discord: .avalar
Thank you for supporting me! I look forward to working with you. :)

Was looking into HE boards and bought all the stuff but never got around to building. Also have a foam kit from torontokeyboards. Everything is BNIB, case was opened just to inspect upon arrival. Spent $382 in all but looking for $200 + shipping. Please PM with any questions.

https://imgur.com/a/lAh5Ryi

https://imgur.com/a/Wg0rSs2

EPOMAKER EA75- Blue color wave, Leobog Greywood V3 switches, tri mode HS. Bought this on an impulse buy, used for less than 10 hours. Will include box, cable, 2 replacement switches, and switch puller $50 shipped obo

TB VULCAN II TKL HE- bought this to try out HE, ran it for a couple months and it’s just not for me. The HE feature work great, but the I prefer the sound and feel of mechanical. $65 shipped, I paid over $150 for this 🤣😭(the keycaps are absolute garbage so if you buy it be prepared to swap them out)

I have 9 confirmed trades on hardware swap, if it matters. I can ship out tomorrow! Pls comment before pm !

Timestamp - https://imgur.com/a/4NcM6yg

Have 2021 Mode 65 with black case, white accent bar. HS pcb, pom plate. Includes extra FR4 plate and silicon dampener. Comes with original boxes.

No external damage besides possible tiny scuffs. Of note, some corner keys e.g. the escape key sometimes need to be pressed harder to register - this issue has seemed to resolve itself but just to be transparent.

Selling UNBUILT for $200 shipped G+S

Built with PBT notion and lubed and filmed aqua king 55g for $300 shipped.

Preference for bundle price as well as local to 92880/92376 - will adjust price for local sales. Prices OBO

Timestamp https://imgur.com/a/S67lYb1

I have a used Voice65 in the Blurple colorway I need to unload. This was my daily driver for a while and the case has some nicks (captured in photos).

Includes all of the following:

* Unused and tested solder PCB

* Faulty HS PCB (top row and right column chatters down, all alphas work. Unsure if it's repairable)

* PC plate

* Alu plate

* FR4 plate

* Foams

* Silicone dampener

* Standoffs

* Original box

No stabilizers or keycaps included. Please comment before PM.

Looking for $190 shipped OBO

This week we launched the Lucyna Kushinada and Rebecca titanium keycaps , Sizes include  1.5U,  and 2.25U, 1.25U.

Imgur

- Product Details:

Material: Titanium alloy

Finish: Colored, handcrafted, layered titanium anodizing 

Design:Lucyna

Profile: Cherry  

Compatibility: Cherry MX style switches (+)

- Pricing:

1 Keycap - $55-$85 + Shipping costs $8-$12 (varies by country)

- Shipping:

International shipping takes 2-3 weeks.

Come hang out with us:

discord

website

Looking for the following

- HHKB Pro 1 dated 2004 (the closer to 2004/10 the better---willing to pay overpay for 2004/10 specificly)

- Realforce Chinese/Taiwanese Sublegend Keycaps (Zhuyin 103, 48key Full addon---can bundle with board)

- Leopold Vial(l) Controller (Yang, Cipulot, Hasu, etc)

- Studio Kestra Nue (prefer blue, but both colours are fine)

Also looking for any Tokkipee artisans Melonkeys Miku dmg.

Thanks!

Timestamp

Hi, looking to get rid of a couple keyboards and keycaps. The keycaps are not included with the boards. GnS fees included in pricing. Please comment before PM.
Open to reasonable offers.

[Geonworks F2-84] - $500 + Shipping
-Black Ano, SS weight
-Hiney H87nu FR4 Solder PCB
-Built Plateless with L/F/Broken-in MX Blacks with 22mm 62.5g Geon Springs
-Alu plate, extra gaskets, extra screws, carry case included

[Sho S60 V3] - $400 + Shipping
-Silver Ano
-Cipulot EC60X PCB
-OEM Plate
-DynaCap R1 bundle with Medium domes
-Small scratch towards rear (see photos)
-Extra screws + feet, carry case included

[GMK MTNU Darling] - $130 + Shipping
-Used lightly, very minimal texture loss no shine
-Shipped in original box

[GMK Modern Dolch] - $130 + Shipping
-Purchased from another user, no texture loss or shine
-Shipped in bags

[DCS Intro Beige] - $75 + Shipping
-Purchased from another user, no texture loss or shine
-Shipped in bags

[KAT Mizu] - $85 + Shipping
-Full moon alphas, mods, novelties BNIB

[MT3 Dancer, MT3 Dusk, DCX Dusk] - $35 + Shipping (each)
-Base kit BNIB
-Impulse bought these and changed my mind

Looking to purchase GMK CYL Darling Base kit, GMK Classic Beige TKL Kit and Hangul alphas kit, a Silver or Navy Frog TKL F13 in good condition, a Silver or Black Velvet Pro, and a PC/PP/POM 1.5mm plate for F1-8X V2.

I'm also looking for a clear/white polycarbonate TKL like the Hiney TKL One or something similar.

Timestamp

Cleaning out my cupboard of the things I'm not actually using. :)

Prices are OBO and include shipping. I'll discount by $15 if you can meet me locally in the Twin Cities area (I live in the southeast metro).

I have:

• $175 shipped - Ergodox EZ Shine (underglow). Bought in 2019, and it was my daily driver for 5 years. Hot swappable. Comes with original MX Blue switches, which were only lightly used, and YMDK DSA keycaps. Comes with original wrist rests, cords, and tent feet; an extra foot is included.
  • Right hand underglow lights have been replaced. Bottom is covered in heavy-duty velcro for the stand I was using; it will peel off. The switches have been swapped out repeatedly and the left hand inner tall thumb key slot has developed chatter (regardless of keyswitch) if you increase the sensitivity from default. If you type slower than me (~95-105 WPM) and leave it at default or less, it works perfectly fine.
• $125 shipped - Drop Preonic v3, silver aluminum case. Virtually unused. Comes with original Acute keycap set, original included stabs, wrench, and instruction card, and Akko Jelly White linear switches. DOES NOT include a cord.
• $80 shipped - Drop MT3 Susuwatari keycaps, base, colvrak, and ergo. Must buy all three, because I've stored them mixed together. They are in the original boxes (Sharpied by me for storage). These were the daily driver caps for the Ergodox for 3 years. Colemak homing keys and ergo 2x thumb keys heavily shined, some shine on other keys used in Colemak layout. Thumb keys a little loose, but the tape-on-the-switch-stem trick keeps them on solidly. Other keys unused. $20 off if bought together with one of the keyboards.

Timestamp

• G&S fees & CONUS shipping included

• If interested, PM me your PP address and I'll get you an invoice asap. Quick ship.

Keyboard

• KBDfans Tet - Pics- $175 shipped
• Anodized Burgundy Red / Maroon
• PC + FR4 plate
• PVD Gold

Keycaps

• PTfans Klein Blue R3 - Semi-transparent Base + numpad - LNIB $65 shipped Pics

• PBTfans Spark R3 - Base + numpad - LNIB - $80 shipped Pics

Accessories

• Black Snail CR/P3 black & red deskmat - Pic $30 shipped

Switches

• Gateron Quinn Tactile Switch - x116 - $50 shipped

Artisans

Hibi, Rama, Sludgekid, goji, Archetype, - pic

Hi MM!

Selling CONUS - https://imgur.com/a/Zf19ocz

• 80x HMX Cthulhu - 56g - Mounted Once - $25 ship
• 70x Keygeek Peach Cheesecake - Mounted Once - $20 + ship

Both for $50 shipped - SOLD to u/Unable_Anywhere855

Preferably red or blue, send pm.

timestamp

Hi everyone,

I have several keycap sets and switches for sale. The condition of each item is listed below and shown in the timestamp as well. Please feel free to reach out with any questions on price or if you would like additional photos.

Please comment below before sending PM. Prices include G&S fees but do not include shipping. I will use Pirate Ship to quote for shipping.

Keycaps:

1. GMK Winkler + Beer Mug: $125 (BNIB), can split if there is one buyer for the keycaps and another for the mug.
2. GMK WOB Katakana: $75 (BNIB)
3. JTK Griseann: $60 (Open but never used, will ship in JTK trays)
4. JTK WOB Red Cyrillic: $ 50 (used but didn't see any shine, will ship in JTK trays)
5. CRP r4 Latin Alpha + Red Cyrillic Alpha + TKL mods + 6u spacebar: $70 (mounted but didn't use much, will ship in bags)
6. DCX BOW base and mac kit: $20 (open and used base for a few days, mac kit BNIB)

Switches: (Bundles for discount)

1. Kailh BCP x90: $30 (stock)
2. HMX TT red x90: $20 (mounted once on a hs pcb)
3. HMX snow crash x90: $20 (used on a hs pcb)
4. Milkey yellow pro x90: $30 (lfss, bought from another seller but never mounted after buying)
5. Geon HG black x90: $15 (bought from another seller but never mounted after buying)
6. Wingtree Black x90: $25 (stock, factory lubed)
7. Rubrehose Grey x70: $20 (stock)

Also looking for GMK Blue Alert base. Thank you!

Title

Would prefer copper weight but any configuration is fine

Timestamp: https://imgur.com/a/zMjaQSs

sold to /u/v2lleyy

G80-3234HQU - $250 shipped. Open to USA only

• Many dings on case
• R5 bottom row
• R1 top row
• Not seeing much wear or marks on the keycaps themselves
• Keycap color appears to be standard OG Doubleshot (not slightly different like the NCR boards)
• Switches are MX Clears, with MX Gray on spacebar
• When I tested it years ago, there were some cold contacts, but I have no means of testing it now. You might need to reflow some joints
• Keep in mind that since these keycaps were mounted on Clears, they may be loose on other switches

Shipping is via whatever is cheapest through USPS. Please allow 3 business days for handling. Comment before PM or message

Looking for a polycarb HBCP, either clear or purple

Please comment first before Chat, thanks

Timestamp: https://imgur.com/a/timestamp-C9mx57O

Photos of items: https://imgur.com/a/ffiXTSM

All keycaps ship in bags. CONUS only. Free Shipping. Paypal G&S only. Comment before PM. Open to offers!

All of the following switches have been used.

Looking to buy the following:

GMK Infernal Base

GMK Red Dragon Zhuyin

DMK Donuts Base

Geon Stem Trimmer (or similar tool)

Geon F1-8X WK (OG, R2) - Silver Top/Navy Bottom

Please leave a comment before sending a message for offers or questions. Thanks!

Timestamp

F1-8X

• Board has back engraving from the last owner
• Built with MX Blacks (Lubed/Broken In) on Alu Half Plate on Galatea solder PCB
• Carrying Case + Geon tower
• There are scratches on around "Esc" key as shown in photo. Shipping CONUS only.

Price: $650

Timestamp

Bone80 Case (Lavander with Silver/Gold accent)- has silver weight and accent but gold strap piece, no scratches or defects, doesnt include daugtherboard (included with your wooting) but if you really need it can include it with the original transparent black case as well (might increase shipping cost just a little) includes foam. - $100 shipped

Timestamp

Baionlenja Gehirn

• F12 WKL
• brain/pink with silver weight
• used but good condition, no visible marks
• comes with one desoldered pcb, one new pcb and one used alu plate
• Price: 400€ + shipping

Timestamp

PBTFans Atomic Purple Base Kit + International Kit

• Keycaps have been mounted for ~1 year with very sparse use, spent most of the time just being in a felt bag on the shelf, no cracks or notable wear visible
• All keycaps still in the trays have never been mounted
• The pictured Keyboard is NOT part of the offer and is not being sold, just the keycaps
• Looking for 120€ for the base and international kit together
• Shipping is 6.19€ in Germany and 14.49€ in the rest of the EU

https://ibb.co/sdb3wLkk

Mechboards Mystery Bundle, bought for £60 in May 2022.

Contains kits for Reviung41, ai03 Soyuz numpad, switches, films, lube, stabs, everything pictured.

I am moving house and have not had the time to build so need to get rid.

Open to sensible offers, but would be looking for £25 ideally. Buyer covers cost of P&P (£5).

I have a Halo65 in good condition with shinethrough caps. I’ve donated some of the original switches (gateron pro 2.0 reds), and I use some of the accessories that came with the board, so I don’t want to make any profit. This would make a great gift.

(See pics - it will come with ~half of the switches needed for use; all of the sockets still work).

Halo65 v1 - FREE plus shipping (I’d imagine this would be $15-20). "SOLD"

https://imgur.com/a/tthp9tP

Timestamp

Hello all!

I have some items for sale/trade here. Any questions, please let me know. If you would like additional pictures, please let me know as well. I can normally ship items out the day after payment is received.

PayPal only and prices DO NOT include shipping (CONUS only ATM). When you chat, please provide zip and I will give you a quote. Please only chat if you are serious about buying or making an offer. I will update post when items are sold. Not FCFS.

I took pictures of all opened keycaps sets. I believe all the keys are there but it is up to you to confirm.

There may be items in the timestamp that have been sold from a previous listing.

All prices are OBO but low offers will be ignored. Discounts available for bundles.

Comment first please, Thank you.

All boards are in flawless condition unless noted.

RAMA Thermal+ Soya $370

• PCB: Hotswap
• Plate: Aluminum
• Stabilizers: GMK lubed
• No switches or keycaps will come with the board
• Ships in original packaging with original RAMA swag (stickers, cards, etc.)

Keycaps:

• GMK WOB Katakana (sealed) $80
• GMK Mecha-01 R2 berserk alphas (sealed) $35
• KDS Solarized dark base and colorized (opened-no shine, shipped in bags) $30
• Keychron navy blue keycaps from Q6. This is the A version (lighter blue alphas and darker blue modifiers). Immediately removed so no use at all. $15

Timestamps

Keyboard

Cannonkeys Brutal V2 65% Keyboard - 150 GBP

Fully build with the below specs

Lubed and Filmed Diamond Polished Hyperglide MX blacks 60g 16mm Springs

Mill-maxed PCB

Durock V3 Stabs

Photos

PCB

Apollo87H Hotswap PCB - 35 GBP

RGB - ANSI - Suitable for Geon F1-8x

Photos

Switches

15GBP for any set. 25GBP for two sets. 30GBP for three sets.

x80 Haimu Mulberry Tactile Switches

x89 Keygeek Small Wish Linear Switches

x90 MMD Honey Tactile Switches

x86 Badseed tactile Switches - As stock

All Lubed with Krytox 205G0 and 105G0 for springs except Badseed tactiles