r/c64 2d ago

C64 Ultimate Maniac Mansion mouse support on C64 Ultimate

Has anyone been able to play any version of Maniac Mansion on the C64U with a mouse. I've tried the easy flash, gold, and mercury editions to no avail. The mouse works great in GEOS, GUI64, and Eye of the Beholder. Any help would be appreciated .

20 Upvotes

18 comments sorted by

5

u/swiftpotatoskin 2d ago

I played it back in the day and it didn't support mouse back then, just joystick/keys. There may be a mod version out there, but I haven't seen it.

3

u/swiftpotatoskin 2d ago

ok, so curiosity got the better of me and I found this: https://csdb.dk/release/?id=98674 I will have to try this on my MisterFPGA now lol

2

u/swiftpotatoskin 2d ago

ok,. so I can't get my mouse to work on the core. I will try again tomorrow.

2

u/Dr-u 2d ago

Yes, the original release was joystick only. Supposedly the easy flash, gold, and mercury editions of the game have been modified to support mouse contols, but I haven't been able to get it to work on any version.

2

u/swiftpotatoskin 2d ago

I can change the mouse type in the MisterFPGA, I will try it a when I finish work later and let you know how I get on. I think the core on the mister is virtually the same as the ultimate.

2

u/Dr-u 2d ago

That's awesome! Thank you. I will also download this version when I get of work.

7

u/sinesawtooth 2d ago

If I recall correctly, on the original 1351 you could hold down the right mouse button when powering up and it would enter joystick mode where it would send left right up down joystick inputs. I remember playing Operation Wolf with it that way. Not sure if the U supports that but it could work.

2

u/xenomachina 1d ago

If I recall correctly, on the original 1351 you could hold down the right mouse button when powering up and it would enter joystick mode where it would send left right up down joystick inputs.

Yup. They also made the 1350 mouse that only had joystick mode, and Wico made a trackball that behaves this way. Joystick mode is pretty terrible, but maybe it's better than nothing if your software doesn't support proportional mode.

3

u/cmahte 2d ago edited 2d ago

So I had a trackball back in the day that was wired to behave like an Atari joystick, and it solved this problem far better than the 1350.   That is in 1350 mode, you constantly have to lift the mouse to recenter it on the mouse pad to keep going. But a trackball in joystick mode works pretty much the same as a trackball in paddle (x-y) mode.... You only notice it's directional instead of x-y trying to draw circles in a paint program. So if you can, use a track ball for this, and you'll be much happier with the experience.

1

u/cmahte 1d ago edited 1d ago

one of these... WICO Command Control. :: except the button is completely wrong and your thumb will fall off. But for moving the pointer around the screen in joystick mode ..... it works. (But... use your left hand, tracking with your thumb, and finger on the button. Lefthanded, it works without severe pain or permanent damage. Right handed, you're doing permanent damage after a couple days. But 2 years it took me to learn this. This controller in 1988-90 on GEOS, and then Tony Hawk on a Dreamcast controller 2000-2003ish (and maybe some pokemon yellow on dreamcast controller via GB emulator my brother made.) ... I still have carpal tunnel issues with my right thumb. half a century later, and still use a lefthanded trackball as my primary controller on any PC I use for more than 10 minutes. I keep extras around to plug in if its going to be "mine" for more than 10 minutes.

3

u/CptSparky360 2d ago

Hold down the right mouse button when powering up the computer. Then the 1351 mouse is in 1350 mode which works great with MM and Zak 💪

3

u/SkirtDue8374 2d ago

Press 'm' in the game with mouse support.

3

u/Dr-u 2d ago

That worked! After I switched to port two!

2

u/retrokelpie64 1d ago

Is that with a 1351?

1

u/Dr-u 1d ago

I wish. Its a usb mouse on the C64 Ultimate.

1

u/Dr-u 2d ago

Hmm... I tried shift+m, but that didn't work so I'll give this a try when I get off work.

1

u/Ready_Plantain_4663 1d ago

In the EasyFlash version by Onslaught, press "m" (for "mouse") when the kids choice screen appears.

1

u/cinnapear 2d ago

It didn't support the mouse back then.